48
Compatible SCPI Commands
SCPI Summary Table
MMEMory:DATA <file_name>[,<block data>] FSE/FSP/FSU Yes
MMEMory:DELete <file_name> FSE/FSP/FSU Yes
MMEMory:INITialize <msus> FSE/FSP/FSU Accepted
MMEMory:LOAD:STATe 1,<file_name> FSE/FSP/FSU Yes
MMEMory:LOAD:AUTO 1,<file_name> FSE/FSP/FSU Yes
MMEMory:MDIRectory <directory_name> FSE/FSP/FSU Yes
MMEMory:MOVE
<file_source>,<file_destination>
FSE/FSP/FSU Yes
MMEMory:MSIS <device> FSE/FSP/FSU Accepted
MMEMory:NAME <file_name> FSE/FSP/FSU Yes Only support "*.png" files.
MMEMory:RDIRectory <directory_name> FSE/FSP/FSU Yes
MMEMory:STORe<1|2>:STATe 1,<file_name> FSE/FSP/FSU Yes
MMEMory:STORe<1|2>:TRACe 1 to
3,<file_name>
FSE/FSP/FSU Yes Agilent supports TRACE1
| TRACE2 | TRACE3 |
TRACE4 | TRACE5 |
TRACE6 | ALL.
Do not support Split Screen
(screen A or screen B).
MMEMory:CLEar:STATe 1,<file_name> FSE/FSP/FSU Accepted
MMEMory:CLEar:ALL FSE/FSP/FSU Accepted
MMEMory:SELect[:ITEM]:HWSettings ON |
OFF
FSE/FSP/FSU Accepted The following
MMEM:SEL commands
related to printer settings
are accepted, but take no
action.
MMEMory:SELect[:ITEM]:TRACe[:ACTive]
ON | OFF
FSE/FSP/FSU Accepted
MMEMory:SELect[:ITEM]:LINes:ALL ON |
OFF
FSE/FSP/FSU Accepted
MMEMory:SELect[:ITEM]:SCData ON | OFF FSE/FSP/FSU Accepted
MMEMory:SELect[:ITEM]:TRANsducer:ALL
ON | OFF
FSE/FSP/FSU Accepted
MMEMory:SELect[:ITEM]:ALL FSE/FSP/FSU Accepted
MMEMory:SELect[:ITEM]:NONE FSE/FSP/FSU Accepted
Table 3-1 SCPI Commands Summary Table
SCPI Command Corresponding
Model
Support Notes
To Next Page
Loading...
