Agilent Technologies EXA N9010A - Page 55

54
Compatible SCPI Commands
SCPI Summary Table
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo 0 to
100PCT
FSE/FSP/FSU Yes
TRIGger<1|2>[:SEQuence]:HOLDoff <time> FSE/FSP/FSU Yes Min = 0 
Max = 500 ms
TRIGger<1|2>[:SEQuence]:SLOPe
POSitive|NEGative
FSE/FSP/FSU Yes
a. Agilent supports up to 6 limit lines.
b. "Accepted" means this command is accepted, but takes no action and reports no error.
Table 3-1 SCPI Commands Summary Table
SCPI Command Corresponding
Model
Support Notes
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html