APPEAR AS Confidential 126/352
Configuration and Status of the SIM cards is available on the Conditional Access->Descrambling page. This will
display a list of valid SIM cards and their serial numbers.
The choice of the EMM source is done in the Descrambling page of the GUI. In this page is also reported the
number of ECMs assigned to each smart card.
The following parameters are available:
Name of the card i.e.: Conax
Serial number of the Smart card
Number of services used by that Smart card.
Number of ECMs used by that Smart card.
Specify Selected valid EMM input source
Status of Subscriptions for the card
6.4 SCRAMBLING
This section provides a brief overview on how scrambling is performed within the unit. It introduces the different
components required and their purpose and explains how to setup the scrambler card to establish ECM and
EMM channels as well as their actual streams.
For information on how to conduct scrambling, add an EMM to an output transport stream, etc. refer to Chapter
8.3.
To Next Page
Loading...