Appear TV DC100X - Port Settings

APPEAR AS Confidential 177/352
8.3.1.2 Import TS PID
Checking the Import TS PIDs on the Transport tab allows you to define PIDs to be manually added to the output
transport stream. These PIDs will not be signalled in the PSI/SI. Click + to add additional PIDs and - to remove
them.
Slot
Contains a selection of the available input modules
Input
Contains a selection of the enabled input ports on the corresponding slot.
PID
Input PID to be forwarded
Out PID
The input PID is mapped to this output PID number; each output PID occupies one
channel through the output module like any other channel. The maximum number
of channels through the output module is 250.
Manually mapped PIDs on outgoing Transport Streams are not checked for PID conflicts.
These PIDs are not signaled in the generated PSI/SI table.
Importing PIDs is treated as a service by the system consequently reducing the number of
services handled by the module with one.
8.3.2 PORT SETTINGS
The Port Settings tab is module specific and differs accordingly. Please see 8.4 for the specific output module
settings.