Appear TV DC100X - Channel Configuration

APPEAR AS Confidential 141/352
Incoming Teletext
Indicates whether Teletext is available on the incoming stream or not
Incoming VPS
Indicates whether VPS is available on the incoming stream or not
VANC Lines OP47
Indicates VANC lines OP47 if available,
VANC Lines SMPTE 2031
Indicates VANC Lines SMPTE 2031 if available.
VANC Lines CC
Indicates VANC Lines CC if available.
VANC Lines service Info
Indicates VNAC Lines Service Info if available.
VANC Lines DPI
Indicates VANC Lines DPI if available.
SMPTE 2031 Data ID
Indicates the SMPTE 2031 Data ID.
Sound Status
Audio Bitrate
Bit rate of the incoming audio stream
Audio Sample Rate
Sample rate of the incoming audio stream
Audio Standard
The standard in which the incoming audio stream is encoded in
Audio Status
Information relating to whether the outgoing audio stream is running or
not. Possible values are OK, Stopped, or Error.
Closed Caption Status
Closed Caption Enabled
Indicates if Closed Caption is enabled on the outgoing stream or not.
Closed Caption Standard
The standard used for the incoming closed caption, either one of the
following:
• DTVmpeg2
• STCE21
• DVS157
• UDATA130
• SCTE20
• DIVICOM21
• DTVavc
• SCTE128
• ATSCa/53
• Off
7.2 CHANNEL CONFIGURATION
Click edit for the decoder you want to configure and the page shown below will be displayed. The configuration
parameters are organized into different sections, and decoder relevant sections are shown.