APPEAR AS Confidential 248/352
The following parameters are available:
The name of the incoming service that are transcoded. This field is empty if
no service is selected.
Service type received for this service. This is meta data in DVB SI and may
not correspond to the actual video codec and format received. The service
type corresponds to the Service type settings in the Service tab of each
output board and can be changed if required
Details on received components for the selected service:
• PID -> PID number received
• Type -> Type of component for selected PID
• Rate -> Bit-rate for selected PID
• Info -> additional information such as language code
• Output -> PID reference of the output component and processing
Here a valid input service can be selected as a Backup Source for the
currently selected main service
Off, Once, Floating or Reverting
9.3.4 PRE-PROCESSING PARAMETERS
Pre-processing is a collective term covering all processing of the video signal done prior to the encoding process.
The purpose of pre-processing is twofold.
Please see the Encoder and Transcoder Parameter Guide for more details on these parameters
The following options are available for PCR of the transcoded service:
To Next Page
Loading...