APPEAR AS Confidential 205/352
Select port which SRT should try to connect to
Select encryption options: AES128, AES192, AES 256
The password. Minimum length is 10 characters
Set the minimum latency for the peer
Set the latency buffer. Gives time to the SRT to do retransmission on lost
packets.
Payload size
packets/frame
Number of MPEG TS packets in each transmission
Time to live for IP packet
Specify how much bandwidth above the estimate bandwidth the SRT can use
when recovering lost packets
8.5 OUTPUT OPTIONS
8.5.1 ENABLE/DISABLE SERVICES IN OUTGOING MPTS.
It is possible to enable and disable a service in an MPTS output in addition to enable/disable the complete MPTS.
In order to do this, use the tick box on the output of each service in a MPTS once expanded.
To Next Page
Loading...