Appear TV DC100X - Subtitling Parameters

APPEAR AS Confidential 253/352
Pass-through original
PID
If selected, the original audio component is also passed to the output service
along with the transcoded audio component.
Encoder
Type
MPEG-1 , AAC, HE-AACv1, HE-AACv2
Channel Mode
Output channel format. Available choices depend on selected Source Mode
and Encoder Type
• Stereo
• Mono
• Dual Mono
Bitrate
Bitrate of compressed audio, available choices depend on Encoder Type and
Mode.
Container
ADTS or LATM (Encoder Type AAC, HE-AACv1 and HE-AACv2 only)
Advanced
Lip Sync Adjustment
-200ms to +500ms adjustment to the lip sync
Level Adjustment
+20 to -20 dB adjustment to the input level
9.3.8 SUBTITLING PARAMETERS
The user can adjust the subtitle language priority on type basis. If a service contains both DVB subtitling
and EBU subtitling on same language, the transcoder will select subtitling source based on the type
priority configured.
Sub Burn-in 1
st
Language
Specify the 1
st
Language for Sub Burn in from drop down list.