Appear TV DC100X - Changing the Language Descriptor of an Incoming Audio

APPEAR AS Confidential 72/352
Component PID
Enter the PID value of the incoming PID to which the signaling shall be
defined.
Component Type
Specify the type of component.
Descriptor Type
Depending on the type of components different descriptor options will
emerge.
5.3.4 CHANGING THE LANGUAGE DESCRIPTOR OF AN INCOMING AUDIO
Figure 5.14 – Edit Language descriptor
PID
The input PID to update.
Type
The audio type where the language descriptor shall be replaced.
• Any
• mpeg-audio
• ac-3
• aac_latm
• aac_adts
• e-ac3-e
Language
The language signaled on the input. If this is not a filtering criteria then use wildcard “*”
Override
The new language descriptor to be used for the incoming component.