Appear TV DC100X - Setting up EPG

APPEAR AS Confidential 291/352
Mbps
Outgoing bitrate, as defined during output configuration
Rotation time
The time required for the EPG playout to complete one cycle.
If the priority of the first 12 hours is activated, then the cycle time of these 12
hour events will be reported.
Service
Service name will be displayed for EPG.
EIT Source
Event Information Table source.
Current program
Service name of current program being displayed.
P/F
Present/ Following status.
Sch
Schedule status.
Validity
Secify the Validity of the scheduled service.
11.2.2 SETTING UP EPG
To set up EPG for your output transport stream, select EPG → Setup.
Figure 11.5 - EPG Setup
The following parameters are available for configuration:
Automatic EIT Source Selection
Matching Criteria
Used to determine which component(s) of the triplet (NET ID, TS ID, and SID)
will be used to match EPG information with its service.
Multiple Match Action
Lists the course of action that should be chosen if there is more than one
service available for the matching criteria.