Appear TV DC100X - Coding Profile

APPEAR AS Confidential 266/352
The following parameters are available for Multiscreen status page:
Source Service
Specify the source of service where it is input from.
Profile
Specify the name of the profile
Video
Specify Video format
Coder
Specify the coder slot
Output
Specify the output source card where it is streamed
IP
Specify the IP address of the service
Port
Specify the port number of the service
Total Bitrate
Specify the total bitrate used for that service
When beginning configuration of the Multiscreen modules, the following steps are recommended:
• Configure Coding Profiles for the desired output resolutions, screens and audio components
• Configure Output Schemes required for multicast output
• Configure Encoder / Transcoder services and assign these to a Coding Profile and Output Scheme
9.8.1 CODING PROFILE
9.8.1.1 Overview
A Coding Profile defines a set of desired video and audio formats that can be allocated to an encoded/transcoded
service for output. It is possible to define as many coding profiles as required. A Coding Profile can be used to
code any number of services on both encoding and transcoding applications.
This page will display the overall configuration of the Coding Profiles: