If a domain has been configured, an additional drop down box will be visible.
Refer to 0 for information on how to add a domain.
8.3.1.1 Delivery Descriptors
If the MPTS stream is to be converted to another network type modulation further down the signal chain, it is
possible to add Cable, Satellite or Terrestrial parameters, which will then be added into the NIT. Select one of the
three options under Delivery Descriptors from the Descriptor drop down box and enter the required
parameters. The figures below illustrate the differences between the three options; correct values for these
parameters can be obtained from respective network operators.
To Next Page
Loading...