APPEAR AS Confidential 164/352
3 Add/Remove the channels on which you want the message to appear, using the arrow buttons between the
Available and the Show on fields. The channels will then be listed in the Show on textbox. Only one
Message Text can be displayed at a given channel at a time. Selected channels will be removed from the
Available textbox.
4 Write the message to be displayed in the Message Text box. This message can contain up to 255 ASCII
characters.
5 Select the vertical position by choosing Top or Bottom.
6 Select the message appearance – either Scrolling or Fixed.
7 Speed can be either Medium or Slow.
8 Background can be solid or transparent.
9 Check Enable OSD Messaging to activate the message. Otherwise, the message will be disabled until you
enable it.
10 Click Submit to register the message.
To Next Page
Loading...