Select one of the three or four available modes, depending on the table:
Stop – playout is disabled
Pass – the table PID will be forwarded from the input, without any
modification. This means that tables sharing a common PID (e.g. SDT A
and SDT O, EIT PF A and EIT PF O, as well as TDT and TOT) must have
common Pass settings to avoid a PID clash with regenerated tables from
the playout carousel. In addition, Pass is not supported for PMT, MGT,
TVCT, and CVCT.
Play – the table will be enabled for playout
Detail configuration of the values:
The BAT Settings dialog provide access to the ability to define bouquets
The NIT Settings dialog provides access to the Logical Channel
Descriptor’s edit dialog
The TOT Settings dialog provides access to the TOT Local Time Offset
Descriptor’s edit dialog
To Next Page
Loading...