APPEAR AS Confidential 227/352
The following parameters are listed under PMT switching:
If a domain has been configured, an additional drop down box will be visible. Refer
to 0 for information on how to add a domain.
Network identification selector.
Transport Stream identification tag
IP address of the output stream
As Original: No Switching rules applied
PMT Switching Active: By choosing a replacement service, the service output will
become the content of the replacement service.
Delay, in seconds, to wait until the switch is performed after SCTE35 message
signaling is received
Delay, in seconds, to wait until the switch back is performed after SCTE35
message signaling is received
To Next Page
Loading...