Appear TV DC100X - Page 3

APPEAR AS Confidential 3/352
3.5.7 MPEG-2/4 SD/HD High Performance Decoder with RF Modulation 45
3.5.8 Quad Decoder with RF Output 45
3.5.9 FM Radio Output 46
3.5.10 DVB-T/T2 Output 46
3.5.11 DVB-S/S2/S2X Output 46
3.5.12 ISDB-T-Cable Output 47
3.6 CONNECTING CLOCK REFERENCE SIGNALS 47
3.6.1 XC5000 4RU Clock Reference Module 47
3.6.2 XC5100 1RU Clock Reference Module 47
4 ADMINISTRATIVE SETTINGS CONFIGURATION 49
4.1 ACCESSING THE WEB INTERFACE 49
4.1.1 Assigning an IP Address 50
4.1.2 IPv6 Address Support 52
4.1.3 Management over IP-Data Port and VLANs 54
4.1.4 Broadcast Firewall 54
4.1.5 DNS Configuration 55
4.1.6 Internal Time Clock Setting / Network Time Protocol (NTP) Server 55
4.1.7 Automatic Daylight Saving 56
4.1.8 Login Management 56
4.1.9 Optional Languages 58
4.2 SUPPORT FOR HTTPS IN MAINTENANCE CENTER 58
4.3 CONFIGURATION OF CLOCK REFERENCE MODULE 59
4.4 LICENSING 59
4.4.1 Ordering a License File 64
4.4.2 Installing a License File 64
4.4.3 Demo Licenses 65
5 INPUT CONFIGURATION 66
5.1 THE INPUTS NODE 66
5.2 INPUT ANALYSIS 66
5.2.1 Input Port Analysis 67
5.2.2 Input Service Analysis 68
5.2.3 Input PID Analysis 68
5.2.4 Port Bitrate Status 69
5.3 MANUAL PSI 70
5.3.1 Defining a Service (PMT) 70
5.3.2 MPTS Support 71
5.3.3 Adding a component for an incoming PID 71
5.3.4 Changing the language descriptor of an incoming audio 72
5.3.5 Edit options on existing manual PSI 73
5.3.6 Remove descriptor 73
5.4 INPUT MODULES 74
5.4.1 IP Input 74
5.4.2 DVB-S/S2/S2X Input 86
5.4.3 ASI Input 93
5.4.4 QAM/DVB-C Input 96
5.4.5 COFDM/ DVB-T/T2 Input 99
5.4.6 8VSB Input 102
5.4.7 QAM-B Input 103
5.4.8 ISDB-T Input 104