APPEAR AS Confidential 53/352
4.1.2.1 Management GUI
IPv6 addresses are supported in the GUI where IP addresses are set on interfaces, eg Control and Data ports, PSI
Syncornisation and Twin MMI settings.
Default interface for Management interface. This can be selected between
control and dataports, as well as any configured VLANs.
All interfaces will automatically get an IPv6 address which is generated based
on router advertisements. The address will have a correct prefix, and be
unique on the connected network.
When enabling Manual IPv6 Address, the port can be configured with a
manual IPv6 Address. Prefix length and Gateway address is also set.
The unit can connect to an IPv6 NTP server by inserting a valid IPv6 address in
the “NTP server” field.
The twin MMI card can use an IPv4 or IPv6 address.
The PSI Synchronization units can use an IPv4 or IPv6 address
To Next Page
Loading...