Appear TV DC100X - Page 60

APPEAR AS Confidential 60/352
Module
License
Description
latens
Enables commnunication with Latens system
descrambler-
ci-gen
number-of-descrambled-
services-cam-a
Enables the number of maximum possible descrambled service on CAM-A
number-of-descrambled-
services-cam-b
Enables the number of maximum possible descrambled service on CAM-B
cofdmout-
cable
modulation-cofdm
Enables COFDM modulation for the output.
num-ts
Enables the number of maximum possible output multiplexes.
dvbs2
dvbs2
Enables the DVB-S2 demodulation options
dvbs2-input-multistream
Enables Multistream reception option for the DVB-S2 module
number-of-t2plp-
extractions
Enables the de-encapsulation of a total of 64 PLPs from up to 64 T2MI input streams per
input card
epg
epg
Enables EPG.
asiout
mip-inserter
Enables MIP on the ASI output port.
dip-cloned-out
mip-inserter
Enables MIP on the dip-cloned output card.
asi-in
number-of-t2plp-
extractions
Enables the de-encapsulation of a total of 64 PLPs from up to 64 T2MI input streams per
input card
switch/ipin
ipin-pro-mpeg-fec
Enables the reception of IP FEC streams on supported hardware
seamless-ip-in
Enables IP input seamless switching
ts-insertion
Enables TS insertion option
dip-in
(dip-t2mi-
decap)
number-of-t2plp-
extractions
Enables the de-encapsulation of a total of 64 PLPs from up to 64 T2MI input streams per
input card
switch/ipout
ip-out-mpts
MPTS refers to Multiple Program Transport Stream. Without the ip-out-mpts license,
only SPTS (Single Program Transport Stream) is available.
ip-pro-mpeg-fec
Enables IP Forward Error Correction (FEC) option supported hardware
output-redundancy
Enables output redundancy for the module.
data-mapping
Enables support for transparently mapped EDI/data streams
pmt-switcher
Enables pmt switching feature on output card
low-latency
Enables low-latency option
qamout-a
modulation-qam
Enables QAM modulation for the output.
num-ts
Enables the number of maximum possible output multiplexes.