IDA8 Global-Net User Manual146
© 2020, ATEÏS. All rights reserved.
To specify which function for controlling going to be created. The available functions list
below:
o Sub-Preset Selector: To change sub-preset.
o Element Control (Range): To control element with range type value. For example
"Level" in Input component with min -90 dB and max 20 dB is a range type of
element.
o Element Control (List or Button): To control element with list or boolean type value.
For example "Mute" in Input component with states On/Off is a button type of
element.
Add/Delete: To add/delete an item for controlling sub-presets or elements.
Item: Index of the item.
Label: The display text of the item.
Control Type: The type of item. This will refer to prior section "Function Combo Box" for
details.
Assign Right: Specify the item is belong to first layer or protected layer.
Assigned: Indicate how many controlled target linked to the item, for example if a item
controls 4 channels of "Mute" simultaneously, the value "Assigned" will be 4.
URC-150AS Settings-Preset Parameters Tab
This tab can be set the behavior of menu.
P.P. to enter First Layer: If this option is enabled, double click to enter the first layer menu is
required.
Constant Mode: There are two logo pictures(Logo A/Logo B)stored in the URC-150AS. Under
this mode the logo will be displayed permanently using the one selected on combo box.
Advertisement Mode: In this mode, the two pictures will be displayed in turn, the time to
switch picture is in the editor on the right.
Waiting Time: Specify how long will the logo pictures be displayed when the URC-150AS is in
idle mode.
Remote Plug-in
The URC device must be proceed the "Remote Plug-in" in order to make the audio processor
recognize its connection. See Remote Plug-in for details.
Assign to Design Objects
The device object in design window needs to be mapped to physical device, then the
configuration of the device can be set to the physical one. Click "Name " field of device list to
select correspond device object.
To Next Page
Loading...
Need help?
General
