Ateis IDA8S User Manual

DSP Components 429
© 2020, ATEÏS. All rights reserved.
Paging Event:
Binds a paging event for the zone selection.
Only events with a singular type are
selectable. See the section "Zone and
Priority" below for more details about the
paging events.
Activation Mode:
o None: If you want to paging using the
control console like PPM-AS or PSS-AS,
which the paging request is not coming
from component itself.
o Permanent: The paging source is always
requested for paging such as background
music.
o Logic Signal: Paging request is established
depending on the logic signal(Low to High or
High to Low) of an input.
The settings allow you to put multiple channels
to perform a logic operation AND/OR to
determine the paging activities.
o Modulation + Logic Signal: Under this mode,
IDA8 decides to request a paging if both the
modulation and logic signal conditions are
satisfied. It releases a paging request if one of
the conditions is achieved.
Zone and Priority
This section is about the zone section of a
paging request, and to specify the priority for
judgment if there are zones conflict with another
paging source which occupies it.
There are two types of paging events,
Integration and Singular.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English