Belarus 892 - Page 10

892-0000010B OM
10
Introduction
The present manual is designed for studying the structure, operation rules and mainte-
nance of the BELARUS-892/892.2 tractors.
Scrutinize this manual. It will help you to study the rules of correct operation and mainte-
nance.
Failure to follow this instruction can lead to operator's injury or a breakdown of the tractor.
Operation of the tractor, its maintenance and repair shall be carried out only by employ-
ees, familiar with all of its parameters and characteristics and informed about necessary safety
requirements to prevent casualties.
In connection with constant development of the tractor some changes, which are not
depicted in the present manual, can be introduced in the structure of certain units and parts.
Any arbitrary changes made by a customer release the manufacturer from responsibility
for possible further injuries to the operator and tractor breakdown.
Adopted abbreviations and conventional notations:
AB – accumulator battery;
DL – differential lock;
PLU – pilot lamps unit;
FB – fuse block;
PTO – power takeoff shaft;
PRS – power reception shaft;
HSC – hydrostatic steering control;
HLL – hydraulic lift linkage;
HS – hydraulic system;
STM – shift-time maintenance;
LCD- liquid-crystal display;
SPTA – spare parts, tools and accessories;
RA – rear axle;
RLL – rear lift linkage;
GB – gearbox;
MTU – machine and tractor unit;
CC – coupling clutch;
LL – lift linkage;
CF – cooling fluid;
CM – control module;
FDA – front driving axle;
HPH – high pressure hoses;
HP – heating plugs;
SM – seasonal maintenance;
MS – maintenance service;
MS1 – maintenance service No1;
MS2 – maintenance service No2;
MS3 – maintenance service No3;
TH – tow hitch;
EE – electrical equipment.