737 Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
NP.21.4 D6-27370-866-EGP
Execute the runway and departure routing.
LEGS page:
Verify the correct RNP for the departure as needed.
Verify that the route is correct on the RTE pages. Check the LEGS
pages as needed to ensure compliance with the flight plan.
Performance Data ................................................................................ Set
PERF INIT page:
CAUTION: Do not enter the ZFW into the GW boxes. The
FMC will calculate performance data with
significant errors.
Enter the ZFW.
Verify that the FUEL on the CDU, the dispatch papers, and the
fuel quantity indicators agree.
If refueling is not complete, enter the PLAN trip fuel as needed.
Verify that the fuel is sufficient for flight.
Verify that the gross weight and cruise CG (GW/CRZ CG) on the
CDU and the dispatch papers agree.
Thrust mode display:
Verify that TO shows.
N1 LIMIT page:
Confirm the OAT value is correct and reasonable for the ambient
conditions.
Select an assumed temperature, or a fixed derate takeoff, or both
as needed.
Select a full or a derated climb thrust as needed.
TAKEOFF REF page:
Make data entries on page 2/2 before page 1/2.
Enter the CG.
Verify that a trim value is shown.
Select or enter the takeoff V speeds.
Verify or enter an acceleration height.
Verify or enter an engine out acceleration height.
Verify or enter a thrust reduction altitude.
Verify that the preflight is complete.
September 15, 2016
To Next Page
Loading...
