737 Flight Crew Operations Manual
Flight Management, Navigation -
FMC Preflight
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-866-EGP 11.40.21
After route activation, the ACTIVATE prompt is replaced by:
• PERF INIT, when the required performance data is incomplete, or
• TAKEOFF when the required performance data is complete.
YW273, YW274
(SB Changes YK981 - YQ456)
3 ACTIVATE
Pushing the ACTIVATE key arms RTE X for execution as the active route. When
the EXEC key is pushed, RTE X becomes the active route and the ACTIVATE
prompt is replaced with the next required preflight page prompt.
Push – prepares the selected route for execution as the active route.
Execution of a route is required for completion of the preflight.
After RTE X activation the ACTIVATE prompt is blanked and the ERASE prompt
replaces the RTE X prompt at LSK 6L.
After the EXEC key is selected the RTE COPY prompt becomes available at LSK
5R and LSK 6L displays the following prompts:
• PERF INIT, when the required performance data is incomplete, or
• TAKEOFF when the required performance data is complete.
Additional Route Page Prompts for an Activated Route
(SB Changes YK981 - YQ456)
EKAT>FFO
ETRTCA
IFRE>TINP
ETRDOM
ESARE<
FFO>TES
NDEST<ALT
September 15, 2016
To Next Page
Loading...
