EasyManua.ls Logo

Boeing 737-800 - Intervention of FMC Altitude Constraints during VNAV Climb; Intervention of FMC Cruise Altitude during VNAV Cruise

Boeing 737-800
1636 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
737 Flight Crew Operations Manual
Supplementary Procedures -
Automatic Flight
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
SP.4.2 D6-27370-866-EGP
Pitch mode – V/S
IAS/MACH Selector .......................................... Set desired speed
Intervention of FMC Altitude Constraints during VNAV Climb
MCP altitude selector ..................................................... Set new altitude
New altitude must be higher than the FMC altitude constraint(s) to
be deleted.
ALT INTV switch ............................................................................ Push
Each push of the ALT INTV switch will delete an FMC altitude
constraint.
Intervention of FMC Cruise Altitude during VNAV Cruise
(SB Changes YK981 - YQ456)
MCP altitude selector .......................................................................... Set
ALT INTV switch ............................................................................ Push
If a higher altitude is selected, a CRZ climb will be started.
If a lower altitude is selected, an early descent will be started.
Intervention of FMC Cruise Altitude during VNAV Cruise
YW273, YW274
(SB Changes YK981 - YQ456)
MCP altitude selector .......................................................................... Set
ALT INTV switch ............................................................................ Push
If a higher altitude is selected, a CRZ climb will be started.
If the airplane is more than 50 nm from T/D, if a lower altitude is
selected, a CRZ descent will be started if the selected altitude is
above any FMC altitude constraint.
If the airplane is more than 50 nm from T/D, if a lower altitude is
selected, an early descent will be started if the selected altitude is
below any FMC altitude constraint.
If the airplane is 50 nm or less from T/D, if a lower altitude is
selected, an early descent will be started.
September 15, 2016

Table of Contents

Related product manuals