EasyManua.ls Logo

Boeing 737-800 - Deleting Created Waypoints on the Nav Data Pages

Boeing 737-800
1636 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
737 Flight Crew Operations Manual
Supplementary Procedures -
Flight Management, Navigation
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
SP.11.10 D6-27370-866-EGP
INIT/REF key .................................................................................. Push
Observe INDEX prompt displayed.
INIT/REF INDEX page ................................................................. Select
Observe the NAV DATA prompt displayed. To access the SUPP NAV
DATA page, enter SUPP into the scratch pad.
NAV DATA page ............................................................................ Select
(If the SUPP NAV DATA page is selected, observe the EFF FRM date
line displayed. If an effective date had not been previously entered,
box prompts are displayed. The effective date must be entered before
proceeding. If required, enter the current or appropriate date on EFF
FRM line and execute.)
Data ..................................................................................................Enter
Enter a crew-assigned identifier on either the WPT IDENT, NAVAID
IDENT, or AIRPORT IDENT line, as appropriate. Use the navaid
category only for stations with DME.
For a WPT IDENT entry, define the waypoint with entries for either
latitude and longitude, or with entries for REF IDENT and
RADIAL/DIST (REF IDENT identifier must already be stored in one
of the FMC data bases).
For a NAVAID IDENT or AIRPORT IDENT entry, enter appropriate
data.
EXEC key illuminates when data has been entered into all box
prompts.
EXEC key ........................................................................................ Push
Repeat above steps to define additional created waypoints as desired.
To enter a new identifier in the same category, simply overwrite the
previous identifier.
Note: To enter a created waypoint into the flight plan, key the
identifier into the scratch pad and follow the route
modification procedure.
Deleting Created Waypoints on the Nav Data Pages
INIT/REF key .................................................................................. Push
Observe the INDEX prompt displayed.
September 24, 2015

Table of Contents

Related product manuals