737 Flight Crew Operations Manual
Supplementary Procedures -
Flight Management, Navigation
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
SP.11.12 D6-27370-866-EGP
Entering a Lateral Offset
RTE page ........................................................................................ Select
Observe the OFFSET prompt displayed.
LATERAL OFFSET page .............................................................. Select
Observe dash prompts for OFFSET DIST.
OFFSET DIST..................................................................................Enter
Enter desired offset distance using format Lxx or Rxx for left or right
offset up to 99 nm. Observe dash prompts for START WAYPOINT
and END WAYPOINT.
START/END WAYPOINT ...............................................................Enter
If no start/end waypoint is entered, offset will begin/end at first/last
valid offset leg.
Change SID or Runway
This entire procedure must be accomplished when a SID is used and the
runway or SID is changed. This will prevent the possibility of incorrect
routing or inadequate obstacle clearance.
DEPARTURES page ...................................................................... Select
RUNWAY....................................................................................Reselect
SID ..............................................................................................Reselect
TRANSITION (if required) ........................................................Reselect
RTE LEGS page ............................................................................. Select
WAYPOINT SEQUENCE and ALTITUDES ................................Check
Modify as necessary to agree with clearance.
EXEC key ........................................................................................ Push
Change STAR, PROF DES, or APP
The associated airport must be entered as route origin or destination.
ARRIVAL page .............................................................................. Select
STAR or PROFILE DESCENT (if required) ................................. Select
TRANSITION (if required) ........................................................... Select
September 24, 2015
To Next Page
Loading...
