737 Flight Crew Operations Manual
Supplementary Procedures -
Automatic Flight
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-866-EGP SP.4.7
ALT HLD mode ....................................................................Verify/select
Verify ALT HLD mode annunciates.
MCP altitude selector .................................Set missed approach altitude
HDG SEL switch ..............................................................................Push
Verify HDG SEL mode annunciates.
Before starting the turn to base:
• Landing flaps (if not previously selected)
• Do the LANDING checklist.
Intercepting the landing profile:
Autopilot disengage switch ....................................................Push
Autothrottle disengage switch ................................................Push
Instrument Approach - RNAV (RNP) AR
Note: Operators need approval to conduct RNAV (RNP) AR Instrument
Approaches.
Note: For RNAV (GPS) and RNAV (GNSS) procedures use the
Landing Procedure - Instrument Approach using VNAV in
Normal Procedures.
Note: This procedure is not authorized using QFE.
The RNAV (RNP) AR Instrument Approach Procedure below
supplements Normal Cruise, Descent and Approach Procedures and
replaces the complete Landing Procedure.
Pre-approach Requirements
Airplane equipment required to begin the approach:
•EGPWS
• 2 FMCs, CDUs *
• 2 GPS Receivers
• Current Navigation Database
• 2 Radio Altimeters
• 2 ADIRUs, IRSs in NAV mode *
• 2 EFIS/MAP or PFD/ND displays (as installed) *
September 15, 2016
To Next Page
Loading...
