737 Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-866-EGP NP.21.15
Hydraulic panel....................................................................................Set
ENGINE HYDRAULIC PUMPS switches – ON
Verify that the LOW PRESSURE lights are illuminated.
ELECTRIC HYDRAULIC PUMPS switches – OFF
Verify that the OVERHEAT lights are extinguished.
Verify that the LOW PRESSURE lights are illuminated.
Air conditioning panel .........................................................................Set
AIR TEMPERATURE source selector – As needed
TRIM AIR switch – ON
Verify that the ZONE TEMP lights are extinguished.
Temperature selectors – As needed
Verify that the RAM DOOR FULL OPEN lights are illuminated.
RECIRCULATION FAN switches – AUTO
Air conditioning PACK switches – AUTO or HIGH
ISOLATION VALVE switch – OPEN
Engine BLEED air switches – ON
APU BLEED air switch – ON
Verify that the DUAL BLEED light is illuminated.
Verify that the PACK lights are extinguished.
Verify that the WING–BODY OVERHEAT lights are extinguished.
Verify that the BLEED TRIP OFF lights are extinguished.
Cabin pressurization panel...................................................................Set
Verify that the AUTO FAIL light is extinguished.
Verify that the OFF SCHED DESCENT light is extinguished.
FLIGHT ALTITUDE indicator – Cruise altitude
LANDING ALTITUDE indicator – Destination field elevation
Pressurization mode selector – AUTO
Verify that the ALTN light is extinguished.
Verify that the MANUAL light is extinguished.
Lighting panel ......................................................................................Set
YK981 - YQ456
LANDING light switches – RETRACT and OFF
September 15, 2016
To Next Page
Loading...
