737 Flight Crew Operations Manual
Flight Management, Navigation -
FMC Takeoff and Climb
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-866-EGP 11.41.9
YW273, YW274
(SB Changes YK981 - YQ456)
6 AT XXXXX
The waypoint constraint line displays the waypoint and constraining altitude of
the current VNAV altitude target. Constraints are entered on the RTE LEGS page
or by departure procedure selection. The constraints can be deleted on this page or
the RTE LEGS page. The waypoint may be a HOLD AT point.
Display is blank if no restriction exists.
7 TO XXXXXX
Displays ETA and distance to go to waypoint on AT XXXXXX line.
If no waypoint constraint exists, values are for CRZ ALT.
8 Error (ERR XXXXX)
Displays predicted altitude undershoot for the waypoint on AT XXXXXX line.
During VNAV operation, the FMC commands a level off if an overshoot is
predicted.
Display is blank, including the label, if no error exists.
9 Climb N1 (CLB N1, CLB – X N1)
Displays the computed climb N1 value.
10 Engine Out (ENG OUT)
Push – displays RT ENG OUT and LT ENG OUT prompts. See ENG OUT CLB
page description.
11 Required Time of Arrival (RTA)
Push – displays the RTA PROGRESS page.
ERASE prompt replaces RTA during a page modification.
September 15, 2016
To Next Page
Loading...
