737 Flight Crew Operations Manual
Flight Management, Navigation -
FMC Takeoff and Climb
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-866-EGP 11.41.17
2 Active Waypoint
Displays the identifier of the active waypoint, the flight plan course to the active
waypoint, and distance–to–go (DTG) from present position to the active
waypoint. Also displays the estimated time of arrival (ETA) and predicted fuel
remaining at the active waypoint. The active waypoint is highlighted by reverse
video.
3 Next Waypoint
Displays the identifier of the next waypoint which follows the active waypoint, the
flight plan course for that leg, and flight plan distance–to–go (DTG) from present
position to the next waypoint. Also displays the estimated time of arrival (ETA)
and predicted fuel remaining at the next waypoint.
4 Destination
Displays the identifier of the destination airport (DEST) and flight plan distance–
to–go (DTG) from present position to the destination. Also displays estimated
time of arrival (ETA) and predicted fuel remaining at the destination.
When a route modification is in progress, the destination line label displays MOD.
Performance predictions include the modification.
YW273, YW274
(SB Changes YK981 - YQ456)
Highlighting is used to identify the MOD or INACT destination field.
5 Altitude Change Point (TO XXXXX)
Displays ETA and distance to go to the following altitude change points as
appropriate to phase of flight:
6 WIND
Displays current true wind direction and speed.
7 Fuel Quantity (FUEL QTY)
Displays the present total fuel quantity remaining as obtained from the airplane
fuel quantity indication system.
• TO T/C: to top of climb for
the active climb
• TO STEP POINT: to the step
point if a STEP TO entry is
made on CRZ page
• TO T/D: to top of descent, if
no STEP TO entry is made on
CRZ page
• TO E/D: to the end of descent
waypoint for an active path
descent; blank if a path
descent is not available.
September 15, 2016
To Next Page
Loading...
