737 Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
NP.21.34 D6-27370-866-EGP
Pilot Flying Pilot Monitoring
Monitor airspeed.
Maintain light forward pressure on the
control column.
Monitor airspeed and call out any
abnormal indications.
Verify 80 knots and call “CHECK.” Call “80 KNOTS.”
Verify V1 speed. Verify the automatic V1 callout or call
“V1.”
At VR, rotate toward 15° pitch attitude.
After liftoff, follow F/D commands.
At VR, call “ROTATE.”
Monitor airspeed and vertical speed.
Establish a positive rate of climb.
Verify a positive rate of climb on the
altimeter and call “POSITIVE RATE.”
Verify a positive rate of climb on the
altimeter and call “GEAR UP.”
Set the landing gear lever to UP.
Above 400 feet radio altitude, call for a
roll mode as needed.
Select or verify the roll mode.
At thrust reduction height, verify that climb thrust is set.
At acceleration height, call for flaps up
maneuvering speed.
Set the flaps up maneuvering speed.
Verify acceleration.
Call “FLAPS ___” according to the flap
retraction schedule.
Set the FLAP lever as directed.
Monitor flaps and slats retraction.
After flaps and slats retraction is
complete, call “VNAV.”
Push the VNAV switch.
Engage the autopilot when above the
minimum altitude for autopilot
engagement.
September 15, 2016
To Next Page
Loading...
