737 Flight Crew Operations Manual
Normal Procedures -
Amplified Procedures
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
D6-27370-866-EGP NP.21.37
Pilot Flying Pilot Monitoring
Monitor airspeed.
Maintain light forward pressure on the
control column.
Monitor airspeed and call out any
abnormal indications.
Verify 80 knots and call “CHECK.” Call “80 KNOTS.”
Verify V1 speed. Verify the automatic V1 callout or call
“V1.”
At VR, rotate toward 15° pitch attitude.
After liftoff, follow F/D commands.
At VR, call “ROTATE.”
Monitor airspeed and vertical speed.
Establish a positive rate of climb.
Verify a positive rate of climb on the
altimeter and call “POSITIVE RATE.”
Verify a positive rate of climb on the
altimeter and call “GEAR UP.”
Set the landing gear lever to UP.
Above 400 feet radio altitude, call for a
roll mode as needed.
Select or verify the roll mode.
Verify VNAV engaged.
At thrust reduction height, verify that climb thrust is set.
Verify acceleration at the acceleration
height.
Call “FLAPS ___” according to the flap
retraction schedule.
Set the FLAP lever as directed.
Engage the autopilot when above the
minimum altitude for autopilot
engagement.
September 15, 2016
To Next Page
Loading...
