737 Flight Crew Operations Manual
Flight Management, Navigation -
FMC Messages
Boeing Proprietary. Copyright © Boeing. May be subject to export restrictions under EAR. See title page for details.
11.60.28 D6-27370-866-EGP
ALERTING MESSAGE CAUSE CORRECTIVE ACTION
PARTIAL ROUTE
UPLINK
(U10.8A and earlier)
An FMC route uplink
message has been loaded
on the RTE page, but
errors were encountered
during the loading
process.
Review the route uplink,
and execute or ERASE.
PARTIAL ROUTE X
UPLINK
(U11.0 and later)
Receipt of an ACARS
non-ATC uplink
message that contains
route data. The route data
has been partially loaded
into the active/inactive
RTE 1 or 2 flight plan
buffer due to errors.
Review the route uplink,
and execute or ERASE.
PERF INIT UPLINK An FMC performance
initialization uplink
message has been loaded
on the PERF INIT page,
and is ready for flight
crew review.
Review the performance
initialization uplink, and
execute or ERASE.
PERF INIT UPLINK
READY
An FMC performance
initialization uplink
message has been
received and is available
for loading on the PERF
INIT page.
Select PERF INIT page,
LOAD performance
initialization data, and
execute or ERASE.
PERF LIMITS UPLINK An FMC performance
limits uplink message
has been loaded on the
PERF LIMITS page, and
is ready for flight crew
review.
Review the performance
limits uplink, and
execute or ERASE.
PERF LIMITS UPLINK
READY
An FMC performance
limits uplink message
has been received and is
available for loading on
the PERF LIMITS page.
Select PERF LIMITS
page, LOAD
performance limits, and
execute or ERASE.
September 15, 2016
To Next Page
Loading...
