CAE Athena - Page 173

Using Athena
147
PN: 905K520652 v2.8
Seizures The manikin can
simulate seizures
with rhythmic
movement of the
arms and rapid
blinking.
The response to
clinical intervention
must be controlled
by the instructor.
VIEW: Neurological
PARAMETER(S): Sei-
zures
None required.
Intracranial Pressure Intracranial
pressure value can
be set and displayed
on the Patient Status
Display or the
TouchPro Patient
Monitor.
The response to
clinical intervention
must be controlled
by the instructor.
VIEW: Neurological
PARAMETER(S): ICP
None required.
Neuromuscular
Blockade
By default,
neuromuscular
blockade is modeled
based on patient
physiology. The
modeled
neuromuscular
blockade value can
be overridden by
manually selecting a
value.
If the NMB value is
set greater than
30%, the eyes will
automatically close.
VIEW:
Neurological
PARAMETER(S): NMB
None required.
Temperature Body and blood
temperature can be
set using the
temperature
parameters. Body
and blood
temperature can be
displayed on the
Patient Status
Display.
The response to
clinical intervention
must be controlled
by the instructor.
VIEW:
Neurological
PARAMETER(S):
Temperature: Body,
Temperature: Blood
None required.
Neurological Features
Anatomy, Physiol-
ogy and Clinical
Signs
Description Software Control Manual Control