Setup
7
PN: 905K520652 v2.8
SETUP
Follow these steps to prepare for your simulation experience.
*If you are using the Vïvo tablet, skip Steps 3 - 6 and proceed to the Using Vïvo section of the User
Guide.
BEFORE BEGINNING SETUP
Proper operation of the simulator requires correct configuration. Before setting up the system, keep
in mind these basic guidelines:
• Read and understand the Cautions and Warnings located in the beginning of the Lucina
User Guide
• Follow the sequence of the steps carefully
• Complete all steps in order
• Do not power on any components until instructed in the text
• Keep all original shipping materials, including boxes. Warranty and repair items must be
returned and shipped in their original packaging.
• When unpacking the manikin for the first time, careful use of box cutters protects both the
packaging and the product
Setting Up the Athena Simulator
1 Place Manikin in the Work Area
2 Power on the Manikin
3* Power on the Instructor Workstation*
4* Connect to the Wireless Network
5* Connect the TouchPro Patient Monitor to the Wireless Network (optional)
6* Start Müse
To Next Page
Loading...
