Using Müse
15
PN: 905K520652 v2.8
USING MUSE
The Müse software is a browser-based application that can communicate directly with the simulator.
With the software, users can run SCEs, create scenarios and SCEs, import and export educational
content and perform administrative functions.
Note: For optimal Müse performance, no other software programs should be open while Müse is
running.
IMPORTANT: Only one Müse application window or tab and one TouchPro window or tab can be used per
Instructor Workstation at a time.
IMPORTANT: Do NOT use any of the browser’s navigational tools (i.e., back and forward buttons) while
operating Müse.
Starting Müse
Once the simulator is powered on and the Instructor Workstation is connected to the simulator
network, the Müse software can be launched.
To launch the software:
1. Using the Laptop or Tablet Instructor Workstation, launch the web browser
The Müse Start Screen
Note: If auto-connect does not occur, the Müse Start screen will not appear when the Internet
Explorer browser launches.
To Next Page
Loading...
