CAE Athena - Step 4: Connect to the Wireless Network; A) Mac Laptop Instructor Workstation Option

Setup
10
CAEAthena
PN: 905K520652 v2.8
Power on the Instructor Workstation
To power on the instructor workstation
a. Place the Laptop or Tablet Instructor Workstation near the manikin in a convenient
location
b. Connect the AC adapter to the Instructor Workstation and a surge-protected power
outlet (optional)
Note: If the Instructor Workstation is running on battery power, ensure the battery is fully charged.
c. Press the power button on the Instructor Workstation
Step 4: Connect to the Wireless Network
A) Mac Laptop Instructor Workstation
Option
Once the manikin and Instructor Workstation are both powered on, they automatically
establish a wireless connection and, when the browser is opened, the Müse software launches.
If the auto-connect does not occur, perform the following steps:
1. Click the WiFi icon in the top toolbar. If necessary, turn WiFi on.
2. Select your simulator’s wireless network (for example, mfsxxx, where xxx is the serial
number for the unit) and enter password
The Simulator WiFi Connection
The case-sensitive network password is caeadmin.
The wireless connection is established.
The Müse software can now be launched.
For more information on starting the application, see the Using Müse section
of the User Guide.
The simulator WiFi
connection