Equipment Overview
3
PN: 905K520652 v2.8
EQUIPMENT OVERVIEW
The Athena female simulator comes with standard equipment as well as optional equipment.
Optional equipment refers to items which are available for purchase to enhance the simulation
experience and additional accessories refers to consumable items which are available for purchase
as they may need to be replaced.
Standard Equipment
The standard equipment for Athena includes all the necessary equipment for basic use of the
simulator. The items listed in the table below are shipped with the simulator.
Full-Body Wireless Manikin
All patient assessments and clinical interventions are played out on the female manikin, which
represents a human patient. At 5 feet, 9 inches (175 cm) in height and weighing 105 pounds (48 kg),
Athena is fully operational in the supine, lateral, prone and seated positions. The simulator offers
features such as arm pronation and supination, breath and heart sounds, palpable pulses, patient
voice, and genitourinary features. The manikin comes with two batteries in place, on the left side.
Laptop Instructor Workstation
The laptop Instructor Workstation is a computer that utilizes Müse or Vïvo software to operate as the
main simulation control center. Instructors control the simulation session from the workstation by
running Simulated Clinical Experiences (SCEs) that meet their learning objectives, or on the fly with
Vïvo.
IMPORTANT: All CAE computer components are preconfigured for use with the simulator. There are no
software installation steps required. Only approved CAE applications should be installed or run with the
simulator.
Power Adapter and Cord
The simulator comes with a power adapter and cord; no other power cord should be used with
Athena.
Table 1:
Standard Equipment
Full-Body Wireless Manikin
Laptop Instructor Workstation
Power Adapter/Cord
Gown
Accessories
To Next Page
Loading...
