CAE Athena - Eyes: Consensual Pupil Response; Eyes: Condition; Eyes: Brightness; Eyes: Panning

Müse Parameter Descriptions
200
CAEAthena
PN: 905K520652 v2.8
Eyes: Consensual Pupil Response
Setting the Consensual Pupil Response option to Yes enables synchronized pupil reactivity between
both eyes. When enabled (default action), shining a light in either eye will cause the opposite eye to
also react. When disabled, only the pupil of the eye where light is shined will react.
Default: Yes
Eyes: Condition
Eight (8) eye Conditions are available for selection in the neurological patient controls window in
Muse:
1. None (both eyes)
2. Jaundice (both eyes)
3. Bloodshot (both eyes)
4. Hemorrhage (right eye)
5. Hemorrhage (both eyes)
6. Keyhole Pupil (right eye)
7. Cataracts (both eyes)
8. Droopy Eyelids (both eyes)
Default: None
Eyes: Brightness
Click the Brightness option to launch a slider which controls the brightness of the OLED displays.
Brightness can be adjusted between 0 and 100.
Default: 100
Eyes: Panning
Panning enables random eye movement (left to right).
Default: Yes
Seizures
The Seizures parameter is used to simulate the presence of seizures. They are either On or Off.
Default: Off
Intracranial Pressure (ICP)
The ICP parameter is used to set the ICP displayed as a numeric value on the Patient Status Display
and on the TouchPro monitor. The value is Modeled by default.
Default: Modeled
Range: 0 mmHg - 65.0 mmHg