Using Athena
158
CAEAthena
PN: 905K520652 v2.8
Pulses
Eight pulse locations are activated, through sensors, by touch:
• Carotid (2)
• Brachial (2)
• Radial (2)
• Dorsalis Pedis (2)
Pulse palpation is recorded in the Events Log.
Note: Always ensure the skin is covering the pulse site(s) when using the manikin.
Pulses are visible and can be controlled from any physiological view. All pulses, unless altered by an
SCE, are palpable by default. When a pulse is palpated, the event is recorded on the Events Log of the
Simulation Session for later review.
To disable a pulse:
1. Click the pulse location on the human form
The Pulses
An enabled pulse
A disabled pulse
To Next Page
Loading...
