Chapter Heading
240
CAEProduct
PN: 905K520652 v2.8
Preparing the Handset for Use
To prepare the handset for use:
1. Insert two AAA batteries into the battery compartment
2. Set the handset DIP switch positions 6 and 7 to OFF and position 8 to ON
3. Turn the power switch off and back on to ensure the DIP switch changes take effect
DIP Switch Settings for the Handset
While DIP switch positions 6 through 8 affect the handset and base station settings, DIP switch
positions 1 through 5 are used to set the radio frequency channel used for communication between
the handset and the base station.
To Next Page
Loading...
