Using Athena
166
CAEAthena
PN: 905K520652 v2.8
Fluids
Athena is capable of IV fluid administration and urine output.
IMPORTANT: Use only clear distilled water, distilled water tinted with food coloring, or distilled water
mixed with white vinegar (50/50) inside the manikin. Administration of any other type of fluid is NOT
supported and may damage the system.
Bleeding and blood administration are available through the software only and are controlled from
the Fluids view in Müse. To access the Fluids view, from the Run screen, click the blood droplet on the
human form. The Fluids parameters appear.
The Fluids View
Fluids
Anatomy, Physiol-
ogy and Clinical
Signs
Description Software Control Manual Control
Blood Loss The software can
simulate blood loss,
causing appropriate
physiological
changes in the
patient.
VIEW: Fluids
PARAMETER(S): Fluid
Loss Blood, Fluid
Loss Plasma
None required.
Urinary
Catheterization
The simulator
supports urinary
catheterization.
When catheterized,
the simulator can
produce urinary
output of
approximately 30-35
mL.
None required. See The Genitourinary
System on the
following pages.
To Next Page
Loading...
