• Chery QQ Service Manual Transmission System
6. Check if the oil level is right.
Disassembly:
1. Disconnect the cathode of the battery.
2. Disconnect the speed sensor connect.
3. Remove the speed sensor
1-SPEED SENSOR
2- O--ring
3-Speedometer drive
gear
Fig.2-10
Installation:
1. Check if there is any crack and disfigurement on the surface of the o-ring and
SPEED SENSOR case, spread lubricant on the o-ring and Speedometer driven gear,
install them on the transaxle assembly.
Screw tightly the torque : 8--12N·m.
1- SPEED SENSOR
2- O-ring
3- Speedometer driven gear
Fig.2-11
2.Connect the SPEED SENSOR connector.
3.Connect the cathode of the battery .
47
Chery Automobile Co., Ltd