Chery QQ - Positions on SQR472 Engine to be Spread with Sealant SQR472

Chery QQ Service Manual Mechanical Part of SQR 472Engine
56
Chapter 7. Positions on SQR472 Engine to be Spread with Sealant
SQR472
No.
Position to be spread with
sealant
Type of sealant
Form and amount of
sealant (reference)
Remark
1
Joingt surface of oil pan Loctite 5699 ф(3~4)mm
2
Rear oil seal bracket Loctite 5699 ф(3~4)mm
3
Valve chamber cover Loctite 5699 ф(3~4)mm
4
Joint surface if timing gear chamber
cover
Loctite 5699 ф(3~4)mm
5
Joint surface of camshaft cover Loctite 5699 ф(3~4)mm
6
Sealing surface of the bowl shaped
plug of cylinder head
Loctite 11747 Spread uniformly
7
Flywheel bolt Loctite 204 0.125(ml)×6
Pre-spread @3
8
Intake pipe stud Loctite 262 0.125(ml)×7 The part screwed into
the cylinder head
9
Exhaust pipe stud Loctite 262 0.125(ml)×6 The part screwed into
the cylinder head
10
Camshaft timing gear bolt Loctite 243 0.2ml
11
Oil collector stud Loctite 243 0.08(ml)×2 The part screwed into
the oil pump
12
Screw of thermoregulator shell
fixing bolt
Loctite 243 0.08(ml)×2
The part screwed into
the cylinder head