Chery QQ Service Manual Transmission System
-32-
5.Hang the return spring, spread lubricant on the side and the arm of the release fork,
install the bearing. Spread lubricant on the splined hub, install the spacer NO.2 and seal .
Fix the release fork cover.
6. Fix the release shaft on the release fork, aim at the riveted mark and tighten the
bolt .
7.Used 2 bolts fix up cable bracket, disassembly clutch cable bracket.
Pack the clutch separation arm
Lubricate the release fork
assembly and the input shaft.
Screw the torque tightly.
N.m
Kg-m
1b-ft
Release shaft bolt
10-16 10-1.6 7.5-11.5
Cable bracket bolt
18-28 1.8-2.8 13.5-20.0
Section 5 Recommended Torque.
Screw the torque tightly
N.m Kg-m 1b-ft
1,Switch Lock nut
10-15 1.0-1.5 7.5-10.5
2,Clutch cable bolt
4-7 0.4-0.7 3.0-5.0
3,Flywheel bolt
57-65 5.7-6.5 41.5-47.0
4,The clutch cover stud
bolt
18-28 1.8-2.8 13.5-20.0
5,Release shaft bolt
10-16 1.0-1.6 7.5-11.5
6,Cable bracket bolt
18-28 1.8-2.8 13.5-20.0
Chery Automobile Co., Ltd
To Next Page
Loading...
