Chery QQ Service Manual BCM Computer Control System
Installation of the wiper abutment
(4)Inspection of conduction of wiper switch and washer switch
As shown in the figure, if the performance of conduction does not conform to the states
shown in the figure, the wiper switch and the washer switch must be replaced.
Switch position Connection
inspection
Conductanc
e
OFF 6-5 Yes
Front intermission (INT) 7-8 6-5 Yes
Front slow (LOW) 8-5 Yes
Front fast (HIGH) 8-9 Yes
Front washing (Washer) 4-3 Yes
Rear wiper (ON) 2-11 Yes
Rear washer in operating
(WISN)
1-10-3 Yes
- 104 -