Chery QQ - Transaxle Maintenance on Car; Exchange of Oil; Differential Oil Seal

Chery QQ Service Manual Transmission System
-41-
Section2 Transaxle Maintenance on Car
I. Exchange of Oil
1- Drive shaft
2- Drain plug
3- Filler plug
Fig.2-1
1.Before checking and changing the transaxle gear oil, be sure the engine has stopped
and the vehicle stops on a plane surface.
2.Lift the vehicle, check the oil level and if there is any leakage.
3.Let out all the used transaxle oil, fill 2.1 L synthetic 18# gear oil (the oil level is
equal with the foot of the filler plug).
4.Before installation, spread oil on the whorl of the filler plug and drain plug.
Item Torque
Filler plug
18~23N·m
Drain plug
18~23N·m
II. Differential oil seal
Replacement:
1. Lift the vehicle, let out all the used transaxle oil.
2. Remove the cotter pin and the lock cap at the end of tie rod.
3. Disjoin the steering and the end of tie rod.
Chery Automobile Co., Ltd