Chery QQ - Removal and Installation of License Plate Lamp Protective Board and License Plate Lamp

Chery QQ Service Manual
- 46 -
——Put the bolt with expand nut into the lo the car body, then fix the
lighting fitting with tapping screw;
——Connect lamp seat harness, install the c
——Close the luggage compartment lid.
6. Removal and installation of license plate lamp protective
board and license plate lamp
Removal:
1. Open the luggage com board.
. Loose the nut which to fix lock core.
e plate lamp.
license plate lamp/protective board assembly
p.
rotective board.
Installation:
——Connect harness connector;
cation hole on
arpet.
partment, remove trim
2
3. Loose two tapping screw on the protective board then take them down.
4. Remove the tapping screw from licens
Removal of
——Remove four fixing screws on the license plate lam
——Remove two fixing screws on the p