Chery QQ - Dampener; Vertical Swinging Arm and Its Sleeve

Chery QQ Service Manual Chassis System
Chery Automobile Co., Ltd
85
II. Dampener
Removal
1、Lift up the car and remove the bolts joining
the dampener with the car bridge.
2、Remove the joining bolt for the dampener and
the car body.
3、Remove the dampener assembly.
Steps of installation:
1. Do the installation by referring to the steps of
dismounting.
2. Points of attention:
① In the screw tightening process, the fastening
bolts controlled by torque + corner tightening
submission limits should be replaced after each
action of loosening.
②The screws should be tightened to the specified
torques after the installation.
III. Vertical swinging arm and its
sleeve
Removal
1、Remove the left and right rear wheels.
2、Remove the joining bolt for the vertical
swinging arm and the rear bridge.