Chery QQ - Disassembly and Assembly of the Audio System; Disassembly and Assembly of Speakers

Chery QQ Service Manual BCM Computer Control System
IV. Disassembly and assembly of the Audio system
1. Disassembly and assembly of the Audio system
Disassembly:
Turn off the power and ignition switch, and remove wires connected with the battery.
Remove the outer shield of the radio.
Loosen the two holding bolts on both sides of the main processor.
Remove wires connect with the main processor and take out the device.
Assembly: Reverse to the disassembly process.
2. Disassembly and assembly of speakers
Note: Do not touch its vibration membrane or other parts. Otherwise, the sound effect
will be affected or damaged!
Disassembly of the front speaker
Remove the panel shield (see the notes for the vehicle body).
Remove the four holding bolts.
Take out the beam plug.
Remove the speaker.
- 97 -